2011-07-06 Milano, Italy (multicam, milanicachannel)
-
bobmetallicafreak
- Phantom Lord
- Posts: 855
- Joined: Mon Dec 10, 2007 1:12 pm
- Location: Sydney,Australia
- Country: Australia
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
cheers bernd:)
-
Metallifreak
- Stone Cold Poster
- Posts: 3287
- Joined: Tue Jul 19, 2005 4:44 pm
- Location: Graz
- Country: Austria
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
Thanx for the share Bernd
------------------------------------------------------------------------

------------------------------------------------------------------------
Official Austrian MetClub Chapter Since 1996 * My Trading Page
------------------------------------------------------------------------

------------------------------------------------------------------------
Official Austrian MetClub Chapter Since 1996 * My Trading Page
------------------------------------------------------------------------
-
Sepu
- That Was Just Your Thousandth Post
- Posts: 2184
- Joined: Thu Apr 03, 2003 10:39 pm
- Location: Switzerland
- Country: Switzerland
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
started to download it right now, please seed till tonight
eheheh
Thanks Bernd for sharing!
Thanks Bernd for sharing!
-
Sepu
- That Was Just Your Thousandth Post
- Posts: 2184
- Joined: Thu Apr 03, 2003 10:39 pm
- Location: Switzerland
- Country: Switzerland
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
already downloaded. But all these sources are not cam sources, I think there are a lot of digicam sources too :S
I would have keep out some bad sources for sure...what's the point on use all of these just for a few seconds?
I would have keep out some bad sources for sure...what's the point on use all of these just for a few seconds?
-
norbinho
- Stone Cold Poster
- Posts: 7615
- Joined: Tue Sep 09, 2003 7:48 am
- Location: Tyrol, Austria
- Country: Austria
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
yeah, i was thinking about this too...the mix was really done very cool, but he could have used more the good cam sources and leave away the bad digicam sources.
btw, i thought this mix was done by a friend of yours, chris? i saw often parts of my source in the mix and i have only given the files to you so far
Ride The Lightning Until It Sleeps!!
TheMechanixxx83 Channel
Norbinho on Tour 2019
Metallica
2019-05-08 Milano
2019-05-10 Zurich
2019-06-13 Cologne
2019-08-16 Vienna
2019-08-18 Prague
2019-08-21 Warsaw
2019-08-23 Munich
2019-08-25 Mannheim
TheMechanixxx83 Channel
Norbinho on Tour 2019
Metallica
2019-05-08 Milano
2019-05-10 Zurich
2019-06-13 Cologne
2019-08-16 Vienna
2019-08-18 Prague
2019-08-21 Warsaw
2019-08-23 Munich
2019-08-25 Mannheim
-
Sepu
- That Was Just Your Thousandth Post
- Posts: 2184
- Joined: Thu Apr 03, 2003 10:39 pm
- Location: Switzerland
- Country: Switzerland
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
mmmmm, just to clarify, there is a bit of confusion about that....norbinho wrote:yeah, i was thinking about this too...the mix was really done very cool, but he could have used more the good cam sources and leave away the bad digicam sources.
btw, i thought this mix was done by a friend of yours, chris? i saw often parts of my source in the mix and i have only given the files to you so far![]()
Like we were agree, I just sent your source to a friend of mine, Mario, the owner of ZonaMetallica (the guy I stopped to work with a few months ago) that was going to make a cam mix for the Local Chapter.
the Milanicachannel on YouTube is owned by a guy called "Micky". This guy was on our board too till a few years ago, then he was banned.
On the same channel, together with Micky, till a few months ago there was another guy working, Ivan. Ivan is a member of ZonaMetallica stuff and stopped to work with him since he didn't have enough time anymore.
Mario asked Ivan to work on the cam mix, but he said he didn't have enough time, and suggested to contact Micky back for helping about the cam mix.
So seems like that finally happened:
Mario shared his sources (including your then, I'm sorry for that) with Micky, and they worked together in 2 different projects.
-one done by Micky alone, shared here by you with all these digicam sources
-one done by Micky and Mario together, that I guess has less sources and maybe just cam sources. I'm going to receive this soon, including a copy for you too.
It it was something bad for Mario to share your source with him, let me know, and I will notice that to him.
I personally didn't know about that since today
Chris
-
norbinho
- Stone Cold Poster
- Posts: 7615
- Joined: Tue Sep 09, 2003 7:48 am
- Location: Tyrol, Austria
- Country: Austria
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
thanks very much for your long and detailed answer, chrisSepu wrote: mmmmm, just to clarify, there is a bit of confusion about that....
Like we were agree, I just sent your source to a friend of mine, Mario, the owner of ZonaMetallica (the guy I stopped to work with a few months ago) that was going to make a cam mix for the Local Chapter.
the Milanicachannel on YouTube is owned by a guy called "Micky". This guy was on our board too till a few years ago, then he was banned.
On the same channel, together with Micky, till a few months ago there was another guy working, Ivan. Ivan is a member of ZonaMetallica stuff and stopped to work with him since he didn't have enough time anymore.
Mario asked Ivan to work on the cam mix, but he said he didn't have enough time, and suggested to contact Micky back for helping about the cam mix.
So seems like that finally happened:
Mario shared his sources (including your then, I'm sorry for that) with Micky, and they worked together in 2 different projects.
-one done by Micky alone, shared here by you with all these digicam sources
-one done by Micky and Mario together, that I guess has less sources and maybe just cam sources. I'm going to receive this soon, including a copy for you too.
It it was something bad for Mario to share your source with him, let me know, and I will notice that to him.
I personally didn't know about that since today
Chris
i don't have a problem with my source being used for this mix...it's just that i think the same than you - if enough good cam sources exist of a show, why use all these low and bad quality other sources?!?!
so, it's not a big deal for me that mario gave my source to micky...micky did a great authoring job on this multicam and it looks pretty cool
thanks very much, would be cool to get a copy if the real cam mix then.
Ride The Lightning Until It Sleeps!!
TheMechanixxx83 Channel
Norbinho on Tour 2019
Metallica
2019-05-08 Milano
2019-05-10 Zurich
2019-06-13 Cologne
2019-08-16 Vienna
2019-08-18 Prague
2019-08-21 Warsaw
2019-08-23 Munich
2019-08-25 Mannheim
TheMechanixxx83 Channel
Norbinho on Tour 2019
Metallica
2019-05-08 Milano
2019-05-10 Zurich
2019-06-13 Cologne
2019-08-16 Vienna
2019-08-18 Prague
2019-08-21 Warsaw
2019-08-23 Munich
2019-08-25 Mannheim
-
het2006
- Disposable Hero
- Posts: 287
- Joined: Tue Mar 31, 2009 5:04 pm
- Country: Austria
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
so for me its no problem, because its a really cool Mix :-)Sepu wrote:mmmmm, just to clarify, there is a bit of confusion about that....norbinho wrote:yeah, i was thinking about this too...the mix was really done very cool, but he could have used more the good cam sources and leave away the bad digicam sources.
btw, i thought this mix was done by a friend of yours, chris? i saw often parts of my source in the mix and i have only given the files to you so far![]()
Like we were agree, I just sent your source to a friend of mine, Mario, the owner of ZonaMetallica (the guy I stopped to work with a few months ago) that was going to make a cam mix for the Local Chapter.
the Milanicachannel on YouTube is owned by a guy called "Micky". This guy was on our board too till a few years ago, then he was banned.
On the same channel, together with Micky, till a few months ago there was another guy working, Ivan. Ivan is a member of ZonaMetallica stuff and stopped to work with him since he didn't have enough time anymore.
Mario asked Ivan to work on the cam mix, but he said he didn't have enough time, and suggested to contact Micky back for helping about the cam mix.
So seems like that finally happened:
Mario shared his sources (including your then, I'm sorry for that) with Micky, and they worked together in 2 different projects.
-one done by Micky alone, shared here by you with all these digicam sources
-one done by Micky and Mario together, that I guess has less sources and maybe just cam sources. I'm going to receive this soon, including a copy for you too.
It it was something bad for Mario to share your source with him, let me know, and I will notice that to him.
I personally didn't know about that since today
Chris
-
Sepu
- That Was Just Your Thousandth Post
- Posts: 2184
- Joined: Thu Apr 03, 2003 10:39 pm
- Location: Switzerland
- Country: Switzerland
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
great guys
Anyway I will have 2 extra copies of the other mix for you Bernd and Christoph too 
-
norbinho
- Stone Cold Poster
- Posts: 7615
- Joined: Tue Sep 09, 2003 7:48 am
- Location: Tyrol, Austria
- Country: Austria
Re: 2011-07-06 Milano, Italy (multicam, milanicachannel)
just one copy, chris, i can make a copy for christoph then and you save postage money
Ride The Lightning Until It Sleeps!!
TheMechanixxx83 Channel
Norbinho on Tour 2019
Metallica
2019-05-08 Milano
2019-05-10 Zurich
2019-06-13 Cologne
2019-08-16 Vienna
2019-08-18 Prague
2019-08-21 Warsaw
2019-08-23 Munich
2019-08-25 Mannheim
TheMechanixxx83 Channel
Norbinho on Tour 2019
Metallica
2019-05-08 Milano
2019-05-10 Zurich
2019-06-13 Cologne
2019-08-16 Vienna
2019-08-18 Prague
2019-08-21 Warsaw
2019-08-23 Munich
2019-08-25 Mannheim
