LG BH10LS30

[Metallifreak]

Oh sorry, I meant another software burner, to replace ImgBurn.

Oh, I did that aswell. Tried with Nero 12 so far, same shit. DVD works perfect, BluRay always writing error. The only good thing is, that there is nothing on the BR then, so they are still blank.

[Metallifreak]

Did you try to go to Device Manager and roll back the driver?Or maybe the firmware update has damaged it in some way......

Can't choose "roll back", but it Looks pretty much the same as yours John. I tried already all 3 Firmware updates. Always the same shit.

[M4ST3R M1K3]

I thought your updated firmware was buggy because you said dvd burning is also broken. Then I wanted to tell you to downgrade/change your firmware but uou said:
"I tried to install the original firmware again, but it does not work" and "I tried already all 3 Firmware updates". I'm a bit confused: can you downgrade/change the firmware or not? Or maybe you mean you can but it changes nothing?

But if I understant correctly DVD burning now works. Then maybe it's just that your drive in not compatible with your DL-BR brand.

Also on google search for "bh10ls30" power calibration, you'll find some links like:
http://forum.lg.de/viewtopic.php?f=37&t=3029
http://www.computerbase.de/forum/showth ... ?t=1061176

[Metallifreak]

I thought your updated firmware was buggy because you said dvd burning is also broken. Then I wanted to tell you to downgrade/change your firmware but uou said:
"I tried to install the original firmware again, but it does not work" and "I tried already all 3 Firmware updates". I'm a bit confused: can you downgrade/change the firmware or not? Or maybe you mean you can but it changes nothing?

But if I understant correctly DVD burning now works. Then maybe it's just that your drive in not compatible with your DL-BR brand.

Also on google search for "bh10ls30" power calibration, you'll find some links like:
http://forum.lg.de/viewtopic.php?f=37&t=3029
http://www.computerbase.de/forum/showth ... ?t=1061176

Yes, not it works for DVD only. I use Verbatim only since the last 6 years, so they should be compatible for sure, since I already burned them the last few days aswell. It's really strange.

[M4ST3R M1K3]

Well I mean you BR-DL blanks may not be compatible with your drive. The fact that you can burn Verbatim DVDs doesn't necessarily mean that your drive can burn Verbatim BR-DL
By the way have you tried DVD Identifier. It tells you the capabilities of your drive on a given blank

[Metallifreak]

Well I mean you BR-DL blanks may not be compatible with your drive. The fact that you can burn Verbatim DVDs doesn't necessarily mean that your drive can burn Verbatim BR-DL
By the way have you tried DVD Identifier. It tells you the capabilities of your drive on a given blank

No, that's impossible. I bought a bulk of 50 blanks at an store in Luxembourg, already used about 20 and all work fine. Now non of them is working. ImgBurn is able to find the correct blank, but does not start writing. Same Problem with Nero 12.

Haven't tried DVD Indentifier, but will give it an try for sure.

[M4ST3R M1K3]

I don't understand. You said:"Since I wanted to burn an DL-BR I needed to update the firmware, since the drive was unable to read the DL-BR blanks. Now I can read them, but can't write with this burner anymore"
So were you able to burn DL-BR before you update the firmware or not?

[Metallifreak]

I don't understand. You said:"Since I wanted to burn an DL-BR I needed to update the firmware, since the drive was unable to read the DL-BR blanks. Now I can read them, but can't write with this burner anymore"
So were you able to burn DL-BR before you update the firmware or not?

No mate, I have already written a few times, I can write DVDs with it, but no BRs. It reads everything, writes DVDs but is unable to burn BRs and DL-BRs